Realizing that we need to act immediately, we think about how to remove the wax and not to harm the clothes. After all, the contamination is easier to remove before it is absorbed into the fabric structure. But to stains from paraffin and wax candles, as well as traces appeared after waxing, you need a special approach.

How to remove wax stains from different types of fabrics

Wax stain is characterized by one peculiarity: the wax soaks into the fabric on both sides and gets stuck between the fibers, so it is not possible to remove this pollution by conventional methods.Do not wash off uncured wax stains with water, as this will harden the wax structure and complicate removal.

Before you remove the wax stain, let it harden and only then use the appropriate method for this type of fabric to remove wax stains. Heat, cold and the use of chemicals can help remove the stain from your clothes.

To remove a wax stain from linen and cotton fabric, you need to:

• gently scrape off the wax;
• put a couple of layers of white unprinted paper towels on the stain from the front and back side;
• iron with a warm iron without using steam;
• change the napkins as they become greasy until the stain is gone;
• if a stain mark remains, wipe it with alcohol;
• wash with laundry detergent at the temperature indicated on the label of the garment.

However, the method of exposure to heat is not suitable for those products that cannot be ironed. In this case, use the following method:

• pour hot water in a saucepan, but not boiling water;
• put the place with the stain on the clothes for 2-3 minutes in the pan;
• take out and lightly dab the stain with a clean cloth.

For stains on delicate fabrics, these cleaning methods will not work. Remove stains from velvet and plush fabrics with alcohol or turpentine by applying a cotton cloth with the chemical substance to the place of pollution for 15-20 minutes. Residues of alcohol are washed away with soap.

To remove stains on suede, hold for a couple of minutes over a steam or over a stream of warm air with a hair dryer, then gently scrub with a special brush for suede. To remove stains from some types of delicate fabrics and lace items dissolve a spoonful of ammonia in one liter of water, pour the stain with this solution and wash.

How to wash wax from your favorite jeans not every housewife knows, but it is not hard to do. First, soak the jeans in warm water for 20-30 minutes, then wash with detergent by hand or in a washing machine. If the stain remains, then leave the thing for 10-15 minutes in warm water with powder and wash again.

How to remove a stain from a candle or a stain from waxing “knows” a dishwashing detergent. Apply 2-3 drops to the greasy spot and leave for 10-12 hours, then wash with laundry detergent. The grease stain from the wax will disappear. This method is suitable for wool and silk.

You need to know how to clean wax using cold, as some types of fabric are contraindicated to remove wax using heat. Put the clothes in a plastic bag, and then in the freezer for 15-20 minutes or put an ice pack around the place of contamination until the wax freezes, after which the place is gently crumpled and remove the remnants of wax.

How to wash a stain from a colored candle

But what to do if colored wax dripped on your clothes and how to wash it? In this case, you can not use an iron, as the pollution will further penetrate into the fabric, and then you can not remove it. Use the method described above. Remove the grease stain with a stain remover, and then run the clothes in the washing machine. But if the grease remains and the paint is washed away, remove the stain with a warm iron, placing white cloths on both sides.

How to Remove Wax from Clothes

In today’s world, women use wax for depilation and face the problem of wax residue on the skin, which are absorbed into the clothes and form greasy stains. And dripped during depilation wax will cause discomfort and leave a yellow mark on the clothes. To remove such stains, use the appropriate method described above.

But if the wax dripped on your clothes during depilation, and you do not have access to an iron, freezer or chemical reagents, you need to wait until the wax hardens, gently scrape it off with your fingernails. Then pour a pinch of salt on the grease and rub it gently, changing the salt until the stain is gone. This method is also suitable for removing greasy traces during the use of greasy creams after waxing with wax strips.

Wax or wax stains can be removed, so don’t rush to throw away your favorite item. Apply these little tricks to the right type of fabric, and your favorite thing will still serve you well. If you can’t get rid of the stain in any way, visit a store of household chemicals and consult with salespeople. Only when you are desperate should you go to the dry cleaner.

Cleaning razors: How to care for electric and wet razors

Regular cleaning ensures that your razor will continue to catch all hairs in the future. In addition, clean, sharp blades prevent skin irritations such as razor burn and razor bumps.

How exactly you clean your razor depends on whether you use an electric or a wet razor. Below you will find detailed instructions and tips for both models. Let’s start with the electric device.

Cleaning electric shavers: this is how to do it

If you own an electric shaver, you should always take a look at the instructions for use to prevent damage to the device. Also, be sure to unplug the shaver before cleaning. If your shaver has batteries, you should remove them before you start cleaning.

How you clean the electric shaver from residues depends on how your model works. The following tips will make it easier for you to clean and care for your device:

• Remove the shaving foil: For a thorough cleaning, it is recommended to disassemble the shaving attachment of the razor as much as possible. If possible, remove the shaving foil to access the blades underneath. Use a fine brush to remove residue and blow or tap out the shaving foil.
• Empty collection container: Some models have a special container for hair stubble right on the shaving head. Tap out this container over the sink after each shave.
• Rinse with water: If your shaver allows it, you can rinse the shaving head under running water. If necessary, intensify the cleaning with liquid soap or a special shaving head cleaner. Let these agents act briefly to remove stubborn dirt and follow the manufacturer’s instructions.
• Disinfect: Remove bacteria from the blades of the electric razor with conventional disinfectant or alcohol. The best way to do this is to apply the product to the exposed parts with a cotton swab.
• Allow to dry: Before you reassemble and store your razor, let it dry thoroughly. This will prevent rust and dull blades.
• Oil your electric razor: To prevent the blades from rubbing against the shaving foil, it’s worth oiling your electric razor about once a week. This care prolongs the life of the blades.

Did you know? Some shavers have a self-cleaning function. The cleaning program is automatically selected and cleans, oils, maintains and dries the shaver.

Wet razor cleaning: Instructions and care tips

Cleaning the wet razor is a little less complicated. This is because there is no current flowing and the blades are exposed from the start. With these tips, the razor will continue to provide optimal results:

• Moisten before shaving: Caring for your wet razor starts before the first pull: dampen the blades under running water. This removes any residue from the last shave and the blades glide better over the skin.
• Rinse the blades: To keep the blades sharp, you should rinse the wet razor after each stroke. After shaving, you should clean the razor especially thoroughly under running water. Do not touch the blades directly, you could hurt yourself! To clean the spaces in between, you can instead use a small, soft brush, for example, or lightly tap the razor on the edge of the sink.
• Let dry: Once everything is clean, you should let the razor air dry before storing it away. Take special care not to allow puddles to form under the blades. This will prevent rust and dull blades.
• Disinfect: As with the electric, you can apply a little alcohol or disinfectant to the wet razor to remove bacteria. It is best to use a cotton swab or spray. When rubbing with a cloth, there is a risk of injury due to the sharp blades.
• Change razor blades: Replace the razor blades of your wet razor regularly. It is recommended to change them every two weeks or after about ten uses. This is the only way to achieve smooth results and minimize the risk of injury. The change is usually uncomplicated thanks to a click system.

Tip: Even if you clean and disinfect your razor regularly, you should not share it with other people. There is a risk of infection.

Cleaning epilators: Here’s what you should pay attention to

Unlike a razor, an epilator provides smooth skin for a longer time. Fine tweezers do not cut the hair, but pull it out of the skin. For best results and hygienic use, you should also clean your epilator regularly. Here’s how to do it:

Note: Before cleaning, be sure to disconnect the epilator from the power supply and, if possible, remove the batteries. Devices for dry use in particular should never come into contact with water.

• Disassemble epilator into individual parts: Most devices can be taken apart without any problems. If necessary, take a look at the operating instructions for your epilator and remove all attachments as far as possible. This will make it easier to clean the individual parts.
• Remove hairs: The plucked hairs often get caught between the tweezers and rollers of the epilator. Remove the hairs by using a dry brush, for example. This is included in the scope of delivery of many devices.
• Rinse with water: If you have a waterproof epilator, you can also rinse it under running water and treat it with a little detergent if necessary. It’s best to check the instruction manual to see which elements are suitable for this cleaning method. Also, make sure that no soap residue remains on the device.
• Disinfect epilator: Remove bacteria from your epilator with disinfectant or alcohol. It is best to use a cotton swab or pad for application and make sure that no liquid enters the device.
• Allow to dry: If you wet-cleaned the epilator, let it air dry before reassembling and storing it. This will prolong the life of the device.

Clean shaver and epilator: A few simple steps ensure optimal results

In order to enjoy your hair removal devices for as long as possible, you should clean them regularly and care for them as needed.

• For example, you can remove stubble from the electric shaver with a brush and rinse some models under running water. A drop of oil prevents the blades from scratching the shaving foil.
• After each use, rinse the wet razor thoroughly with water and allow it to dry thoroughly in the air. It is best to change the blades regularly to get smooth results and avoid injuries and irritations.
• To clean the epilator, disassemble it into its individual parts as much as possible. Remove hairs with a gentle brush. You should only use water if the epilator is waterproof.

All devices should be allowed to dry thoroughly after cleaning. In addition, you can disinfect blades and co. with a little alcohol or disinfectant. This makes the next application particularly hygienic.

Electric toothbrush: Daily cleaning

An electric toothbrush mixes saliva with toothpaste to clean food debris from spaces and teeth. If you don’t clean it before and after each use, this mixture will stick to the handle and brush. To avoid this, there are a few things you should keep in mind.

To prevent contamination

1. Wash your hands thoroughly before picking up the toothbrush. This will prevent dirt from getting from your skin onto the device.
2. Rinse the brush under warm water before each use. This will remove any traces of toothpaste or crumbs trapped between the bristles.
3. After brushing, remove the brush head from the device. Run it under warm running water again to remove any residue.
4. Tap out the brush and then shake off the water.
5. You should also briefly hold the handpiece under the running water tap to remove toothpaste residue and water splashes. Then dry the device with a towel.

Proper storage of your toothbrush

• Always store the handpiece and brush separately. If you leave them together, rust can form.
• Do not store them in a cupboard or in a storage box.
• Place both vertically on a shelf or windowsill, in a bright place. This will allow both to dry in the fresh air and you will prevent bacteria from forming and multiplying.

Tip: Put the heads of your toothbrush in a brush holder. If you have several brush heads, always make sure that they do not touch each other.

How often you should change the brush heads

The bristles of your electric toothbrush should always be straight up and not fray toward the edge. If they are worn down, the brush won’t be able to clean your teeth of plaque as well. In addition, protruding bristles can injure the gums. Replace the brush head at least every three months. If the bristles are already damaged, replace the head earlier. This can happen if you brush your teeth more than twice a day or if you apply too much pressure when brushing.

Flu or cold: disinfect electric toothbrush?

You just got over a cold with a sore throat, tonsillitis and a cough. Could you catch it again if you don’t change your toothbrush attachment? True, the likelihood of this is low. But in the case of bacteria, there is at least the possibility that they will be transmitted again. This is especially true if you have not rinsed the brush properly or it has been wet for a long time. Instead of throwing away the brush head, you can disinfect it:

1. Get some antibacterial mouthwash or a product used to clean braces or dentures.
2. Pour some of the liquid into a glass and put the brush in with the head down. The bristles should be completely covered.
3. Leave the brush in it for two to three hours and then rinse it thoroughly with water.

You should never clean the brush head in the dishwasher or microwave. This will damage the bristles.

Caution: Even if you have disinfected the brush head, you should change it after three months at the latest.

Removing water stains on the handpiece: With vinegar or dishwasher?

Even if you rinse the handpiece of your electric toothbrush every day, limescale stains can form. There is a particular risk of this if the water flowing from the tap tends to be hard. Other dirt can also accumulate over time. You should therefore inspect the handpiece regularly and clean it separately.

• More stubborn dirt can be cleaned with a drop of dishwashing detergent and a damp cloth.
• Vinegar helps against lime stains: Mix it with a little warm water and moisten a cloth or cotton pad with the solution. Wipe the handpiece with it.
• If this does not remove the lime deposits, wrap the cloth around the device for a few minutes and soak it. Then carefully scrub the plastic with a nail brush.
• Then rinse the handpiece thoroughly under running water and dry it.
• Place it upright so that the residual moisture can evaporate.

Caution: The handpiece should never be placed in the dishwasher. The electronics in the handle can be damaged during the rinsing process.

A clean electric toothbrush is more hygienic

You should clean your electric toothbrush after every use to prevent germs and bacteria from settling. It is enough to hold the brush head and the handpiece under running water. Make sure that no food residue or toothpaste stains remain. If limescale stains do form on the handpiece, remove them with vinegar, for example. You should always store the head and the device open and separate from each other. The brush head should be replaced every three months. If you have just been ill, you can change it earlier – or disinfect it.

The electric toothbrush when traveling: Store it correctly

You also want to take your electric toothbrush with you when you travel. However, you should not transport the brush attachment openly in your suitcase or toiletry bag. There they come into contact with dirt, dust and germs. In addition, the bristles can be crushed. Therefore, keep them in a toothbrush container or put a cap on the toothbrush.

You can also buy a travel case for the handpiece and brushes. Many manufacturers already include one with the device.